C388
KEY FEATURES
150W x 2 Continuous power into 8 or 4 Ohms
Bluetooth A2DP with aptX supported
MM Phono input
Analogue line inputs
USB port for service purposes
SPDIF coax and optical inputs
Speaker A, Speaker B
Preamp/Subwoofer out
Headphone amplifier
MDC Slots for future upgrades
IR remote
Smartphone Control App
12V Trigger in/out
IR in/out
RS-232 Serial port for control
Control4, Crestron, RTI, URC, AMX, Savant, Elan certified
PREAMPLIFIER
Line Input, Pre Out
Output Impedance
Source Z + 240 Ohm
Input Sensitivity
93mV (ref. 500mV out, Volume maximum)
Frequency Response
±0.03dB (20Hz-20kHz)
Maximum voltage output – IHF load
>4.5V (ref. 0.1% THD)
Tone Controls
Treble: ±7.0dB at 20kHz
Bass: ±7.0dB at 60Hz
Balance: -10dB

GENERAL SPECIFICATIONS
Continuous output Power into 4 Ohms and 8 Ohms (Stereo)
>150W (at rated THD, 20-20kHz, both channels driven)
IHF Dynamic Power
8 Ohm 250W
4 Ohm 350W
2 Ohm 400W
POWER CONSUMPTION
at Auto Standby ON and Network Standby OFF
0.5 Watts*
at Auto Standby ON and Network Standby ON
1.2 Watts**
OFF mode (Power switched OFF)
0.1 Watts
 
* – After 20 minutes of no user interface interaction and no active source input
** – With established wireless Bluetooth connectivity and 20 minutes of no user interface interaction and no active source input
NOTE: Bluetooth connectivity is always live when configured
WEIGHT & DIMENSIONS
Gross Dimensions (W x H x D)*
435 x 120 x 390mm (17 1/8 x 4 3/4 x 15 3/8)”
Radiance 3
Cabinet: 3-way, reflex loaded
Finishes: Antique Ash, Natural Ash
Bass Drivers: 160mm pressed alloy
Mid Driver: 130mm pressed alloy
Tweeter: 38mm Neodymium Ring Radiator with DXT
Cabinet: Curved, braced 15mm, MDF carcass
Frequency Response: 40Hz to 45kHz ± 3dB
Power Handling: 200W peak programme
Impedance: 8 Ohms
Sensitivity: 90dB for 1 Watt at 1m
Dimensions: 920 x 230 x 297mm (36.0 x 9.0 x 11.7 inches)