TX-SR444
Amplifier Section
Power Output
All Channels
Dynamic Power
100 W/Ch (6 Ω, 1 kHz, 1% THD, 1 Channel Driven, IEC)
100 W/Ch (6 Ω,1 kHz, 1% THD, 1 Channel Driven, JEITA)
160 W (3 Ω, Front) 125 W (4 Ω, Front) 85 W (8 Ω, Front)
THD+N (Total Harmonic Distortion + Noise)
0.08% (20 Hz–20 kHz, Half Power) Damping Factor Over 40 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance
200 mV/47 kΩ (Line)
Frequency Response Tone Control
1V /470 Ω (Subwoofer Pre Out)
10 Hz–100 kHz/+1 dB, -3 dB (Direct Mode)
±10 dB, 20 Hz (Bass) ±10 dB, 20 kHz (Treble) 
      Signal-to-Noise Ratio 100 dB (Line, IHF-A) 
Speaker Impedance 6Ω–16Ω
Dimensions (W x H x D) : 435 x 160 x 328 mm
Supplied Accessories
• Indoor FM antenna • AM loop antenna
• Speaker setup microphone • Instruction manual • Remote controller • AA (R6) batteries x 2
LX-1
• Bass reflex enclosure
• 2-way speakers
• 100mm advanced fibre bass driver
• 25mm microfibre dome tweeter
• 86.5dB sensitivity (1w @ 1m)
• 20-80W recommended amp power
• 6 Ohms nominal impedance
• 4.1 Ohms minimum impedance
• 65Hz-20kHz frequency response
• 2.2kHz crossover frequency
• 260 x 160 x 235mm
LX-C
Sealed box enclosure
2-way speaker
2 x 100mm advanced fibre bass driver
25mm microfibre dome tweeter
87.5db sensitivity (1w @ 1m)
20-100w recommended amp power
100w peak power output
6 Ohms nominal impedance
5 Ohms minimum impedance
80Hz - 30kHz frequency response
2.1KHz crossover frequency
160 x 400 x 210mm
LX10 SUB
1 x (10") 250 mm PP cone long-throw
Frequency Response
40- 120 Hz ±3 dB
Amplifier Power Output  200W
Peak Power Output
350 W
Line Input Sensitivity
200 mV for maximum output
Crossover Range
30 - 150 Hz
Inputs
Stereo line in (2 x RCA phono)Avg. Max Output @1m
118 dB
Features
Phase inversion, auto on-off
Dimensions
Height: (412+35) mm (with feet)
Width: 312 mm
Depth: (392+15) mm
Mono (LFE) line in (RCA phono)